Zamp Z-20 Series Anti-Fog Helmet Shield

The Zamp Z-20 Series Anti-Fog Shield is designed to reduce fogging on your helmet shield, providing clear vision in all racing conditions. This high-quality replacement shield is compatible with RZ-36, RZ-36 DIRT, RZ-36 Air, RZ-37Y, RZ-42Y, RZ-56, RZ-56 Air, RZ-59, RZ-60, RZ-60V, RZ-62, RZ-62 Air, RZ-64C, RZ-65D, RZ-70E Switch, and RL-70E Switch helmets and follows Zamp’s easy-to-install standard procedure.

Features:

• Anti-Fog Coating: Helps prevent fogging during hot, cold, or humid racing conditions.

• Durable Construction: Engineered to provide long-lasting clarity and performance.

• Easy Installation: Designed to fit RZ-36, RZ-36 DIRT, RZ-36 Air, RZ-37Y, RZ-42Y, RZ-56, RZ-56 Air, RZ-59, RZ-60, RZ-60V, RZ-62, RZ-62 Air, RZ-64C, RZ-65D, RZ-70E Switch, and RL-70E Switch helmets with a simple replacement process.

Installation Instructions:

1. Lay a towel on a flat surface and set the helmet on it.

2. Remove the shield pivot tensioners on each side (smaller screws).

3. Remove the shield pivot screws on each side (larger screws). For best results, use a quarter to loosen/tighten.

4. Remove the shield and wipe down the rubber seal and mounting area with a soft cloth.

5. Place the new shield on the helmet, ensuring the two white washers are in place.

6. Hand thread the shield pivot screws to hold the shield, then tighten with a quarter until snug. Do not overtighten.

7. Hand thread the shield pivot tensioners and adjust to desired tension.

This shield ensures optimal visibility, allowing racers to focus on the track without worrying about fogged-up shields.